How to select the thickness of color coated plate
The thickness of the color coated plate is also different on some occasions, which can not be ignored. How do we choose the thickness of the color coated plate
1. The thickness of the wall and the roof is different because they bear different pressures. The normal wall should be a little thinner. However, we generally have a thickness of about 1.0mm, and the thickness error is not greater than plus or minus 0.1mm. The thickness directly affects the quality of the product. It does not mean that the thicker the color coated plate, the better the quality of the product. Under the normal production environment, the thicker the product, the higher the strength.
2. Because our use environment is different, the thickness is also different. Generally speaking, under the same environment, the thicker the color coated plate, the higher its strength, and the better its quality. Generally, the plates used for the wall and roof are the same, but the difference is the thickness of the product. Generally, 2.0mm-3.0mm is used for the roof, while 1.5mm-2.0mm is used for the wall, which is made of unsaturated epoxy resin, high-strength fiberglass, imported UV film and other raw materials through high-temperature pultrusion. The internal and external colors are the same, and the product will not be ugly because there are scratches on the outside, because it is not a layer of paint on the surface. The general thickness is 1.0mm, 1.5mm, 2.0mm, 2.5mm and 3.0mm. These are closely related to the price.
The above is the introduction of some methods for selecting the thickness of color coated plate. The thickness requirements are different in different environments. We can select the appropriate thickness according to the construction environment and construction requirements to complete the construction.
