Do you know how to heat Shandong color steel plate room? Many people think that the cold air is blowing in the color steel plate room in winter. In fact, this is a big mistake. If you can operate according to the following points, you can ensure that the temperature in the color steel plate room is around 14 ℃ when the outdoor temperature is - 25 ℃:
1. Color steel composite board with insulation layer thickness of 10 cm (unit weight of 8 kg benzene board).
2. The windows and doors are of moderate size, and the sun shines in the south.
3. There is central heating in the room.
4. There is thermal insulation ceiling.
Warm keeping method of color steel plate house in winter:
1. Fireproof and flame retardant core material (rock wool, cement foam) color steel plate shall be used for material selection, and polyurethane core material color steel plate shall not be used.
2. The heating equipment used in the color steel plate room must not be close to the wall, and must be kept at a certain distance.
3. The wiring in the room must not cross with the core material to install wires. If it is necessary to do so, the wires must be covered with protective sleeves to prevent all potential safety hazards.
5. Fire fighting equipment shall be complete and effective, and fire alarm shall be installed to facilitate rapid evacuation.
6. The office area and living area shall be set respectively to keep a safe distance between color steel plate houses.
Winter heating and insulation of compound color board room:
1. For heating in the furnace, it should be noted that the connection between the chimney opening and the wall must be well insulated, which can be wrapped with rock wool or asbestos, and the interface can be sealed.
2. Water heating. Use traditional heating. The chimney is treated in the same way as the furnace.
3. Electric heater heating. Pay attention to the safety problems caused by overloading of wires.
How to keep the color steel room dry in winter:
1. Apply foam glue to fill gaps. Or see if there is a problem in the waterproof angle design of the color steel room.
2. The only explanation for indoor dripping is the large temperature difference between indoor and outdoor. We can use dehumidifiers to dehumidify indoor to avoid indoor dripping to a large extent.
